A view from the D.M. & I.R. Duluth Dock 6 looking down the stacker tracks to the pellet stacker in operation. Shows the stacker and trailing conveyor between two piles of taconite pellets. The Lift Bridge is in the background.
Central corridor, depicting a barn and houses to right (thought to be numbers 143, 141, 139, 137) and to left (thought to be numbers 144, 142, 140, 138, 136).
A panorama of the Alpena Mine in Virginia, Minnesota, shows the open pit mine in September of 1915 as it opened up the underground drifts. Both open pit and underground mining took place in the same time period.
An unidentified underground mine pit with a steam locomotive Number 1 of the Duluth and Iron Range railway at work, probably at Tower or Ely, Minnesota, on the Vermilion Iron Range.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
The Minnesota Iron Company, incorporated in 1890, was engaged in underground iron ore mining on the Vermilion Range that ran between Tower and Soudan on the west and Ely and Winton on the east of the range.
Contributing Institution:
University of Minnesota Duluth, Kathryn A. Martin Library, Northeast Minnesota Historical Collections
5 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 5 chaps or harnesses are cinched securely and the mule is brought to the ground.
7 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 7 the trussed mule is slid onto a pallet, and is now ready to slide over to the nearby headframe.
2 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 2 tethers are attached to the mule's forelegs, not tied to a pole.
1 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 1 the mule is fed a heavy meal from a feedbox at the headframe to make it sedate.
8 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 8 the mule in the headframe skip is now ready to lower tail first to the underground mine.
6 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 6 the mule's legs are securely tied to prevent injury to the mule in the headframe.
4 out of 8 photographs which depict the process involved in lowering a mule into an iron mine. In step 4 leather chaps or harnesses are placed on the mules sides and neck.
View of the D.M. & I.R. Ore Dock 6 in the Duluth Harbor. Moored at the dock are "D.M. Clemson" and an unidentified ore boat. Each ore boat has a bumboat beside it (a bumboat is a floating supply store). The Clemson is being loaded. Also in the photograph is Steam Locomotive 205.
An electric locomotive pulling a train of dump cars. The mine tipple is in the distance. Note the overhead wire is set off to the side of the track, rather than above, to allow for clearance for the tipple.
Step 2 of 5 in a series of photographs depicting the process of testing an ore sample. In this step the ore sample is dumped into the crusher in the mine lab in step 2.
Step 1 of 5 in a series of photographs depicting the process of testing an ore sample. In this step an ore sample is gathered from the ore train for testing in the mine lab in step 1.
Step 3 of 5 in a series of photographs depicting the process of testing an ore sample. In this step the iron ore sample is ground through a 200-mesh screen in the mine lab in step 3.
Step 5 of 5 in a series of photographs depicting the process of testing an ore sample. In this step a ring stand and crucible are used to determine the chemical analysis of the iron ore sample in the mine lab in step 5.
Step 4 of 5 in a series of photographs depicting the process of testing an ore sample. In this step the crushed iron ore sample is dumped into the riffler to get a representative sample in the mine lab in step 4.