The American Hoist & Derrick building is visible on the far right in this photograph of the Mississippi River and its surroundings, taken as part of preliminary work before improvements were made to the river and harbor in the mid 1930s. Improvements to the harbor and river included dredging and other projects in and around the city of St. Paul. Work was completed in 1936.
An anchor barge is visible alongside the U.S. Dredge "William A. Thompson" . The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Men study the discharge the end pontoon of the U.S. Dredge "William A. Thompson" , visible in the background. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
This photograph documents the disposal area along the left bank of the river, immediately below the barge terminal, part of a project to improve the St. Paul harbor and Upper Mississippi River. The overall project was completed in 1936.
The downtown St. Paul skyline and St. Paul rail yard can be seen in this photograph, taken as part of preliminary work before improvements were made to the St. Paul harbor and Upper Mississippi River in and around the city of St. Paul. Projects included dredging and other water improvements. Work was completed in 1936.
The downtown St. Paul skyline can be seen in this view of the Mississippi River and St. Paul harbor. This photograph was taken as one of the preliminary stages of work on the harbor and river. Improvements included dredging and other projects in and around the city of St. Paul. Work was completed in 1936.
The downtown St. Paul skyline can be seen from Dayton's Bluff, documenting the improvements made to the St. Paul harbor and Upper Mississippi river banks in St. Paul, Minnesota, in the mid-1930s.
A fifteen-inch dredge pumps into the disposal area on the right bank of the Mississippi River in the vicinity of the St. Paul municipal airport. The dredging was a part of improvements to the St. Paul harbor and Upper Mississippi River in and around the city of St. Paul, Minnesota. Work on the project was completed in 1936.
A fifteen-inch dredge pumps into the disposal area on the right bank of the Mississippi River in the vicinity of the St. Paul municipal airport. The dredging was a part of improvements to the St. Paul harbor and Upper Mississippi River in and around the city of St. Paul, Minnesota. Work on the project was completed in 1936.
Dredges operate below the federal barge terminal in St. Paul, Minnesota. This photograph documents dredging and other improvements made to the St. Paul harbor and Upper Mississippi River in and around the city of St. Paul, Minnesota, in the mid-1930s. Work on the project was completed in 1936.
The Dredge "William A. Thompson" on the Upper Mississippi. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
The Dredge "William A. Thompson" on the Upper Mississippi. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
The Dredge "William A. Thompson" on the Upper Mississippi. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
The Dredge "William A. Thompson" working on the Upper Mississippi. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
The Dredge "William A. Thompson" works at night on the Upper Mississippi. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Two shipbuilders work on the deck of the Dredge "William A. Thompson" as it is being constructed in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Shipbuilders work on main deck house and starboard side of the Dredge "William A. Thompson" as it is being constructed in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Machinists work on dredge pump engine of the Dredge "William A. Thompson" as it is being constructed in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Workers building deck of the Dredge "William A. Thompson" as it is being constructed in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Workers building skylights for the Dredge "William A. Thompson" in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Workers load materials onto the Dredge "William A. Thompson" in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Workers inspect the Dredge "William A. Thompson" in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
Propeller of U.S. Dredge "William A. Thompson" in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
The main generator of the Dredge "William A. Thompson" in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.
A section in the galley on the Dredge "William A. Thompson" in the Dravo shipyards in Pittsburgh, Pennsylvania. The dredge is a cutter-head dredge used on the Upper Mississippi and tributaries from 1937 to 2005. It is named for "William A. Thompson" (1864-1925), an engineer with the U.S. Army Corps stationed in Fountain City in 1896 and charged with river improvements on the Upper Mississippi.